New Construction Inspection Cost: Where a Pre-Drywall Scan Fits In

Introduction

A brand-new home can still hide bad workmanship. Wiring routed through the wrong stud bay, a sagging duct, a missing fireblock: once drywall goes up, nobody sees any of it again.

So when you price a new construction inspection, price the documentation window too. Costs swing with home size, construction phase, scope, site access, region, and whether you buy one standalone visit or a phased package.

This guide compares published U.S. inspection fees, shows where a pre-drywall scan fits, breaks down the cost components, and helps you build a budget that keeps documentation and inspection separate.

Key Takeaways

  • Published pre-drywall inspections run roughly $300 to $450; three-phase packages start near $850 to $950.
  • A pre-drywall scan documents conditions. It does not replace a licensed inspector or code official.
  • Square footage, foundation type, phase, travel, and optional tests drive price.
  • Ask for itemized quotes that separate inspection, scan, testing, and repeat visits.

How Much Does a New Construction Inspection Cost? (Pricing Overview)

No universal rate exists. Providers price by home size, construction phase, access, location, and deliverables. The figures below are regional provider benchmarks, not national averages.

Misunderstood scope causes real trouble:

  • Underbudgeting backfires when the pre-drywall visit, a specialty test, or a return visit is excluded.
  • A municipal code inspection or builder walkthrough is not an independent inspection.
  • A scan does not include defect opinions, code determinations, or destructive testing.

Typical Cost Ranges

Phase Provider and region Published fee
Final inspection TMK, southeastern Pennsylvania and northern Delaware From $400
Post-drywall walkthrough DS Home Inspection, Maryland From $550, up to 4,000 sq ft
Pre-drywall Pait, Raleigh $300 to $360 (up to 4,000 sq ft)
Pre-drywall Metrolina, Charlotte area (2026) $340 slab or $390 crawlspace/basement up to 2,500 sq ft
Foundation/pre-pour Secured Inspections, Houston $325 up to 2,500 sq ft
Three-phase package Secured Inspections, Houston $950 up to 2,500 sq ft
Six-stage package Iron Clad, Idaho and Oregon $850

Published new construction inspection fees by phase and provider

Most providers do not publish update dates, and size brackets differ. Treat these as starting points, then request a quote for your own home.

Pre-drywall 3D scans are a separate product with separate pricing:

  • Utah 3D Homes starts at $0.05 per square foot.
  • Earnshaw Electric charges $500 per scan for homes under 10,000 square feet.
  • ScanningAndModeling starts at $600 up to 4,000 square feet, plus $100 per additional 1,000.
  • Vroomk starts at $1.50 per square foot, depending on scope.

Scan pricing varies widely because scope differs. Some include a hosted walkthrough only, while others add measurements, exports, or lifetime access. Completion captures may be priced separately.

What Different Price Levels Typically Include

Entry level: One phase, visual coverage of accessible areas, and a basic report. It suits a buyer who wants one independent look, but leaves other stages unexamined and may exclude return visits.

Mid-range: A thorough inspection with detailed photos, plus selected add-ons such as radon or a sewer scope. Secured's $175 sewer add-on is one example.

Higher-cost: Multi-phase packages, large or complex homes, specialty testing, repeat captures, and long-term digital records. Iron Clad's six-stage package includes correction follow-ups worth budgeting for.

Where Does a Pre-Drywall Scan Fit?

A pre-drywall scan is a non-invasive capture taken after framing and visible mechanical systems are installed but before drywall covers them. InterNACHI's standard places inspection after rough systems and before insulation and interior coverings. Exact timing depends on site readiness and builder access.

Code Inspections, Home Inspections, and Scans

These are three different deliverables:

  • Municipal code inspection: checks minimum regulatory requirements for public safety, health, and welfare.
  • Independent pre-drywall inspection: a visual examination for material defects, reported to you.
  • 3D spatial scan: a browsable, measurable record of conditions on the day of capture.

Municipal code inspection versus independent inspection versus 3D scan

A scan is not a substitute for a licensed inspector, engineer, code official, or specialist assessing structural, electrical, plumbing, HVAC, or environmental compliance. Even inspections exclude concealed or latent defects.

What the Scan Can Document

The capture preserves the visible locations and routes of framing, rough electrical, plumbing, ductwork, and openings, along with measurements. It does not see through opaque materials or validate workmanship by itself.

After drywall closes, that record helps you:

  • Avoid unnecessary exploratory cuts
  • Plan future service or remodeling
  • Settle questions about site conditions
  • Keep evidence for owners, contractors, insurers, or attorneys

How Scan Pricing Is Structured

Expect price to depend on:

  • Square footage, rooms, or levels
  • Access and capture complexity
  • Requested measurements or exports
  • Turnaround, private sharing, and data retention
  • Single capture vs. recurring progress scans

Vroomk's Role

Vroomk provides interactive 3D spatial documentation as a complement to inspection. Its rough-in and framing captures create one shareable walkthrough link covering structure, MEP, and slab conditions while walls are open. A measure tool records lengths, heights, and areas, and you can export thousands of stills.

One contractor described a 40-minute rough-in visit that captured every stud. Another customer located wiring before a remodel and avoided thousands in repair work. Vroomk does not perform regulated inspections.

Key Factors That Affect the Cost and Total Cost Breakdown

Your budget includes more than the base visit. Scope, access, reporting, optional testing, repeat visits, and digital storage all add up.

Property Size, Layout, and Site Access

Square footage moves price directly. Metrolina charges $340 up to 2,500 square feet and $400 for 2,501 to 3,500 on slab. Multiple stories count too: Austin REI prices by total home area, including upper floors. Tight spaces, detached structures, and messy sites add time.

Construction Phase and Scheduling

Foundation, framing, pre-drywall, and final inspections need different timing and expertise. If the site isn't ready, expect possible wait-time, cancellation, or return-visit charges. Ask before booking.

Inspection, Scan, and Reporting Scope

A basic visual report differs from one with annotated findings, measurements, exports, and interactive walkthroughs. Ask exactly which deliverables are included and how long files stay accessible.

Travel, Specialty Services, and Repeat Visits

Some providers add trip charges, such as Master Home Inspector Group's $125. Optional tests are separate from any scan:

  • Radon: about $150 to $200 (Pait); $165 (TMK)
  • Termite: $85 add-on to $160 standalone (TMK)
  • Sewer scope: $295 to $395 (Pait)
  • Reinspection: $200 (Pait) or $250 (TMK)
  • Full HERS rating: $1,850 to $2,500 in Massachusetts, per HERS Rating Company

New construction inspection add-on testing and reinspection price comparison

Total Cost Line Items

  1. Initial inspection or scan fee: one time, with standard deliverables.
  2. Setup, travel, and coordination: possible visit-based charges for remote sites or builder scheduling. Vroomk lists a $300 advance and 60-mile coverage.
  3. Reporting, exports, and hosting: enhanced files, private sharing, or storage may recur.
  4. Repeat or phased captures: each added foundation, pre-drywall, progress, or final visit adds to the total.
  5. Repairs and specialty investigations: correction work, engineering opinions, and destructive testing are never in the base fee unless stated.

Five new construction inspection budget line items breakdown

Low-Cost vs High-Cost Options—and How to Set the Budget

The right choice depends on construction phase, risk, documentation needs, and what it costs if concealed conditions are lost.

Lower-Cost Option vs Higher-Cost Option

A single standard inspection or limited pre-drywall capture may be enough for a smaller, simple home from a builder you trust. Spend more when the home is large or complex, when you expect disputes, or when future service access matters.

Higher spend usually covers phased inspections, repeat documentation, specialists, or long-term digital records you can reopen years later.

How to Estimate the Right Budget

  1. Describe the property: square footage, stories, foundation type.
  2. Identify the phase you need covered.
  3. Request itemized pricing.
  4. Confirm deliverables in writing.
  5. Ask about exclusions, return visits, and travel.
  6. Compare several providers on scope, not price alone.

What Most People Miss

  • Focusing only on the upfront fee
  • Overlooking storage or repeat-visit costs
  • Treating the builder's walkthrough as independent protection (it is not)
  • Buying a scan without confirming files can be measured, shared, exported, and accessed later

Conclusion

New construction inspection costs vary by scope, size, timing, access, location, and add-ons. A pre-drywall scan is a complementary documentation expense, not a replacement for inspection.

Itemized quotes and a plan before drywall closes help you weigh today's cost against later repair, coordination, and evidence needs. Request a quote that separates inspection, scan, specialty testing, repeat visits, and ongoing digital documentation.

Frequently Asked Questions

What does a 100 hour inspection cost?

"100 hour inspection" is not a standard residential category. It is an aircraft maintenance term under 14 CFR 91.409. Confirm what the provider means and request a written scope and quote.

What is the most important inspection for a house?

It depends on stage and risk. The pre-drywall inspection is especially valuable for concealed construction, and the final inspection is essential before closing.

What is the biggest red flag in a home inspection?

Serious findings include structural movement, active water intrusion, unsafe electrical work, or improperly installed critical systems. Rely on the inspector's report and bring in appropriate specialists.

What is a 5 point inspection?

The meaning varies by provider. Florida insurers use a four-point version covering electrical, plumbing, HVAC, and roof for older homes. Confirm the five categories, exclusions, and whether it applies to new construction.